A. We have 7 universal sizes of stretch covers to fit almost any car out there! We also have 3 sizes of Motorbike covers and a range of custom fit motorsport covers for cars with large wings. Use our size guide to find the best fit for your car. If you're unsure, or you cannot find your car in our size guide, you can contact us directly here for some guidance. We can also create fully bespoke covers tailored exactly to your vehicle.
Q. WHAT ARE THE COVERS MADE FROM?
A. Our covers are made from a soft, thick blend of 84% polyester, and 16% elastane. The elastane is what gives the covers their stretchiness and ability to form fit around the lines of the vehicle. All of our covers have a fleecy inner lining to protect the paint from any scratches or scuffing. They also feature a 4-way elastic hemming giving the covers the ability to tuck under the front and rear of the car to hold the cover in place.
Q. MY CAR HAS A PERMANENT RADIO ANTENNA. HOW DO I FIT THE COVER WITH THIS?
A. If your car has a radio antenna the best option will be to remove the antenna itself. If this is not possible, and it is not possible for the cover to fit effectively with the antenna in place, then follow these instructions:
1. Apply cover to car and ensure it fits as evenly as possible.
2. Using a sharp knife/blade, cut a small slot in the cover immediately above the top of the antenna.
3. Using a strong thread, sew around the edges of the slot to prevent any tearing.
If you're unsure, you can contact us directly here for some guidance.
Q. MY CAR HAS A REAR SPOILER/WING. HOW WILL THIS IMPACT WHAT SIZE I SHOULD CHOOSE?
A. This depends on the size of the wing. Small subtle lips and spoilers are usually accommodated for with the stretchiness of the covers.
However, in the case of aftermarket wings or large factory wings (think Porsche GT3 RS, Viper ACR, AMG GT Black Series), it may be worth getting the next size up, or taking a look at our Motorsport Collection which has covers specifically made for cars with large wings.
If you're unsure, you can contact us directly for some guidance.
Q. MY CAR HAS ROOF RACKS. HOW WILL THIS IMPACT WHAT SIZE I CHOOSE?
A. This is dependent on just how large the roof rack system is. Roof racks will increase the volume of the car that needs to be covered, so there's a chance you might need to go up a size.
For example, you probably wouldn't need to go up a size if you just had standard factory solid rail racks, however, a large canopy 'tray-style' fixture would likely warrant going up one size.
If you're unsure, you can contact us directly for some guidance.
Q. WHAT ARE YOUR NORMAL SHIPPING LEAD TIMES?
A. Shipping to metropolitan areas across Australia will normally take 3-5 business days from the date of dispatch. Regional areas allow up to 7 business days to receive your consignment.
During busy sale periods such as Black Friday and Christmas, shipping can be delayed.
Q. CAN I USE THE SLEEPING BAG COVER OUTDOORS?
A. The Sleeping Bag Covers are designed exclusively for enclosed indoor use. The soft, fleece-lined covers are not weatherproof and should not be used in any environment exposed to the elements. The Sleeping Bag car covers are not suitable for use outdoors or in open-sided carports.
Q. DO YOU MAKE AN OUTDOOR COVER?
A. No, we don't offer an outdoor cover as yet. But watch this space!
Q. WILL THE COVERS MICRO-SCRATCH MY PAINT WORK?
A. With its soft fleece-lined inner lining, the Sleeping Bag ensures that paintwork is protected from any micro scratching or scuffing. The covers are also machine washable to prevent any dirt or dust buildup that could harm the paintwork. For best results, only apply to a clean vehicle, and always wash the cover when dirty!
Q. DO YOU OFFER CUSTOM LOGO PRINTING?
A. Yes! We now offer custom printing for $120 per print. Simply select your desired car cover colour, then select 'Customised Logo Print' under the Bonnet Logo Print drop-down menu before adding to cart. You will then be prompted to upload a logo of your choice. The file you submit is what we will print on your cover. The print location will be on the bonnet area of the cover. The size of the print will vary based on the logo design submitted. Maximum print size will be 60cm x 40cm. Please ensure:
- Your file is an EPS, JPG, or PNG file ONLY
- Logo resolution is a minimum of 2000 x 2000 px
- The colour of your logo doesn’t clash with the colour of the cover you have selected
In order to use a design, you must have the full rights to use the design. If you are unsure or have doubts over ownership, please confirm your ownership or seek permission from the copyright owner.
Still daydreaming about WTAC? Yea, so are we. For those of you who weren't able to make it to Sydney for World Time Attack Challenge, we have a small handful...
Relive the glorious day that was the 2024 Noosa Concours d'Elegance with The Cover Shop's limited run of t-shirts. For those of you who weren't able to make it to...
Introducing our very own ultra-absorbent drying towel – The Nun. So god damn good it should be religious. One of the largest chamois towels on the market at 100cm x...
This little package is great for a quick detail and adding shine to your paint. Use it to remove light smudges and blemishes before applying one of our car covers....
It is a cardinal sin to apply one of our car covers to a dirty vehicle. So avoid this painful situation, we offer this quick and easy little package to...
Developed in conjunction with our good friends at Bowden's Own, our Seat Cover Protection Pack is designed to give your Jackaroo Seat Covers that next level of protection. Consisting of an extra...
The MXS 3.8 is an advanced battery charger and maintainer. It has selectable programs for use on different sized batteries and special programs for desulphation, and charging on cold days....
Want to hook someone up with some Cover Shop goodness but don't know what their cover vibe or correct size might be? Our Gift Cards are the solution!Simply choose your...
